Flexible PI Heating Film is a clear amber colored polyimide film. It is a thin, translucent material, has excellent dielectric strength.The process for making polyimide heater is similar to that of Etched Foil Silicone heaters. It is a high-temperature flexible heating element with excellent dielectric properties capable of operating environments between -40 degree celsius to 260 degree Celsius.
Providing a variety of complex shapes design, and different power designs. Membrane in the same piece electrically heated heating circuit can be designed and holding circuit
Providing a liquid immersion design (non-standard)
|
|
Custom parameters
|
Illustrate
|
|
1
|
Size
(l*w*h):
|
Length/width/height or circular diameter, or direct drawings or samples.
|
|
2
|
Thickness
|
0.1mm~1mm.(There are requirements for thickness or hardness can + reinforcement plate)
|
|
3
|
Apply
|
The products of the application, on what equipment, what materials are heated.
|
|
4
|
Cable
|
Whether a lead is required, the length/diameter/end of the lead is required.
|
|
5
|
Use the ambient temperature
|
What is the ambient temperature of the product application.
|
|
6
|
Product usage temperature
|
How much °C the product needs to be heated.
|
|
7
|
Whether a temperature control device is required
|
Thermostat/ thermostat/ temperature sensor, etc., if necessary, provide relevant parameters.
|
|
8
|
Voltage:
|
1.5V~500V
|
|
9
|
Product resistance power parameters
|
Use voltage, resistance, power.
|
|
10
|
Inrush current
|
The maximum allowable load of inrush current is greater.
|
|
11
|
Whether the back strap is required
|
Please describe the material to which the product is pasted.
|
|
12
|
Sample requirement quantity
|
Proofing the quantity of finished products.
|
